background image

There are no consumer serviceable parts on the 

Nano-UV™ Dual Scanner

. Any service attempts by 

unauthorized repair facilities could result in injury 

or damage to the Dual Scanner and will void all 

warranties. The 

Nano-UV™ Dual Scanner

 must be 

returned to Zadro Health Solutions, Inc. for repair.

Maintenance

When the LCD screen does not come on, simply 

replace the batteries. Nano-UV™ light bulb can be 

used for more than 6000 hours.  

For the best disinfection performance, always keep 

the Nano-UV™ light bulb clean and avoid stains.

In case the Nano-UV™ light bulb gets dirty, wipe it 
with a soft cloth VERY GENTLY.

Caution

Improper operation of the 

Nano-UV™ Dual 

Scanner

 may cause injury. Read and understand 

all warnings prior to operating. 

• Do not use in any manner other than 

   instructed in this User’s Guide.

• Danger – Nano-Ultraviolet light can be 

  harmful to skin and eyes. 

• Do not use the Nano-UV™ light on any part of  

   the body

• Do not look directly into the Nano-UV light. 

  However, it is safe to view Nano-UV™ light 

  through glass or plastic containers.

• Keep out of reach of children

• Do not touch the Nano-UV™ light bulb

• Mercury Hazard Do not allow any impact to 

  the Nano-UV™ light bulb. If the light bulb is 

  cracked, chipped or damaged, do not operate. 

  In case the Nano-UV™ light bulb breaks, use 

  a vacuum cleaner to clean it up. Do not 

  touch the mercury directly with bare hands 

  especially pregnant women. 

• The Nano-UV™ light contains a small amount 

   of mercury, which may cause redness or   

   irritation to the skin if exposed. The mercury 

   content meets RoHS requirements (less than 

   0.5mg)

• Remove the batteries when not in use for

 

   

long periods of time

• Only use in clear water. Do not use in ice 

  water

• Do not use as a light source

• Operating the Nano-UV™ Dual Scanner 

  above 122ºF (50ºC) and below 68ºF (20ºC) for 

  surfaces and below 59ºF (15ºC) for water is 

  not recommended and the Nano-UV™ light 

  may not be fully functional.

• To dispose of your Nano-UV™ light, contact 

  your local dept. of environmental protection 

  or other authority for disposal guidelines.

Содержание NANO-UV DUAL SCANNER









Отзывы: