How to use:
1. Do not use this product or allow anyone to use
this product until proper operating procedures
and warnings are understood.
2. Open the battery cover located on the top of the
Nano-UV™ Dual Scanner
by pressing down on
Nano-UV™ Dual Scanner:
Model No. NANO15
Power
Button
Select
Button
Two (2) Side
Buttons
Used To
start Nano-
UV™ Dual
Scanner
LCD
Screen
Sensor Pins
for Nano-UV™
Water
Disinfection
Nano-UV™
light wand
Battery
Compartment
Battery
Cap
Protective
Cover
tab and pulling outward simultaneously. Insert 4
AAA alkaline batteries (included).
3. Remove the protective cover located on the
bottom of the Dual Scanner that protects the
UV light.
NOTE:
Nano-UV™ Dual Scanner
will
NOT
turn on
with protective cover in place.
4. Press and hold the Power button for 3 seconds
then release to power the
Nano-UV™ Dual
Scanner
.
NOTE: The Nano-UV™ light will not turn on until
both gray buttons on the side are pressed
simultaneously. This also functions as a child
safety feature.
For Disinfecting Surfaces:
1. Press Select button and choose
“Surface” on the LCD screen.
2. Allow the Nano-UV™ light to warm-
up for at least 30 seconds (3 times
10 seconds) before using.
3. Hold the
Nano-UV™ Dual Scanner
between ¼
to 1½ inches from the surface you want to scan.
4. Simultaneously press the two gray buttons
located on the sides and the Nano-UV™ light
will come on for 10 seconds.
NOTE: The Nano-UV™ light will not turn on until
