the batteries. If the batteries are low, the Nano-
UV™ Dual Scanner may not be effective in killing
targeted germs on the surface in 10 seconds
(99.9%) or in water in 40 seconds (99.9%).
Battery Replacement:
1. Remove battery cover located on the top of the
Nano-UV™ Dual Scanner
by pressing down on
the tab and pulling outward simultaneously.
2. Remove the depleted batteries and replace
them with new batteries in the polarity direction
indicated inside the battery chamber.
3. Securely place battery cover cap back onto
Dual Scanner.
Battery Caution:
• Use only fresh alkaline batteries of the required
type and size.
• Do not mix old and new batteries, different types
of batteries, or rechargeable batteries of different
capacities.
• The batteries may explode if mistreated. Do not
attempt to recharge or disassemble the batteries.
• Depleted batteries are to be removed from the
Dual Scanner immediately.
• Dispose of the old batteries properly, and
according to your local regulations.
• Ensure that batteries are kept out of reach of
young children.
the water disinfection process for 40 seconds,
or press the “Select” button to stop the process
and shift to “Surface” disinfection mode.
8. The LCD screen on the top of
the
Nano-UV™ Dual Scanner
will count down and display “OK”
when the process has finished.
9. Carefully flip the Nano-UV™
light wand back into the original
position in the chamber for storage when water
disinfection is complete.
When disinfection is finished:
The
Nano-UV™ Dual Scanner
protective cover
must be placed on the bottom of the
Nano-UV™
Dual Scanner
to protect the Nano-UV™ light and
conserve batteries.
Auto off function:
If the
Nano-UV™ Dual Scanner
is not used for
more than 1 minute, the Dual Scanner will turn off
automatically to save power.
Prolonged Storage:
After prolonged storage, press and hold the
“Power” button until the LCD screen lights up and
the Nano-UV™ light wand will turn on after normal
start up sequence is completed.
Battery Indicator
When the battery voltage is low, the
LCD screen will read ”LO”. Replace
