Zadako Z1, Руководство пользователя

Страница: 7 / 17

abcd
└─┘
SEN=5
Finding out current Car alarm settings
To find out the current settings of Car alarm the question mark is used.
?
The question mark is considered an independent command, therefore it must be
separated by space. It does not change any setting. If you want to use it, you have to
put it at the end of SMS message. After sending SMS message containing the
question mark car alarm will answer by SMS message with actual settings.
Example: If you do not wish to change these settings, only to check them, you can
send an SMS message with following text to the SIM card in your car alarm :
abcd
└─┘
?
You will receive an answer from car alarm:
abcd
└─┘
T1=+421903111111
└─┘
T2=#
└─┘
T3=#
└─┘
T4=#
└─┘
SEN=5
└─┘
REL=OFF
└─┘
AT=15
└
─┘
DT=30
└─┘
(RFID)
The easy and convenient way to change settings of your device is that you re-write
the received SMS message the way you would like to have the settings set and you
send the SMS message back to the telephone number of SIM card inserted in your
car alarm.
Notice that the way of arming (RFID) is in brackets. The reason is not to activate
RFID reading mode.
If you wish to program the disarming by RFID tag again, remove brackets before
sending this SMS and send it in this form:
abcd
└─┘
T1=+421903111111
└─┘
T2=#
└─┘
T3=#
└─┘
T4=#
└─┘
SEN=5
└─┘
REL=OFF
└─┘
AT=15
└─┘
DT=30
└─┘
RFID
7