Zadako Z1, Руководство пользователя

Страница: 5 / 17

recommended to change the password again after the installation, to keep
your car and your personal information safe !
Example: To change factory default password „abcd“ to new password „aa22“, write
following SMS message and send it to the telephone number of SIM card inserted in
the device:
abcd
└─┘
PWD=aa22
Setup commands
Certain functions of Car alarm can be set and controlled by commands sent by SMS
messages. Each SMS must begin with valid password. After the password a space
„
└─┘
„
follows, and certain setup commands, also separated by space „
└─┘
„
.
It is not necessary to put all the commands in SMS. If you do not wish to change any
setting, you can exclude that certain command. If you send a command with same
parameter as already is set, it does not change anything.
Important:
•
Each SMS message must begin with your password,
•
Different commands must be separated by one space,
•
Sequence of commands is possible to change. Only commands „?“, „?S“, „?
P“ must always stand at the end of SMS message,
•
It is allowed to exclude commands – in that case the former value will remain
valid
•
Maximum length of SMS message is 160 characters,
•
At the end of SMS it is possible to write query “?” to check actual settings,
„?S“ to check settings of text reports, or „?P“ to receive current position of
vehicle.
The list of certain commands and its meaning is listed in the table below.
5