Zadako Z1, Руководство пользователя

Страница: 10 / 17

abcd
└─┘
S0=Car alarm Z1#
└─┘
S2=battery low#
Texts S1, S3, S4, S5, S6, as well as other settings keep unchanged in this case.
Setup of control method
Arming and disarming Car alarm is possible in three ways:
a)
Control by ignition key (Set by command KEY)
Turning on ignition key in ignition box to position 1 deactivates Car alarm
(switches it off from arming). After switching off the engine and taking out the ignition
key the departure time begins, it is set for 30 seconds, and is indicated by slow
blinking of red LED diode. After departure time expires arming activates, it is
indicated by short flashes of red LED diode.
b) Control by RFID tag (Set by command RFID)
Turning on ignition key in ignition box to position 1 activates RFID reader,
which is installed close to ignition box. By attaching programmed RFID tag to RFID
reader is Car alarm disarmed (switched off). Sound signal (beep) confirms this
together with double blink of LED diode. After switching off the engine and taking out
the ignition key the departure time begins, it is set for 30 seconds, and is indicated by
slow blinking of red LED diode. After departure time expires arming activates, it is
indicated by short flashes of red LED diode.
c)
Direct setup (Using commands ARM, DISARM)
Car alarm arming is possible to activate and deactivate also by sending the SMS
message containing the command ARM for activating and DISARM for deactivating.
SMS message has to be sent to telephone number of SIM card installed in Car alarm
device.
COMMAND MEANING
KEY
Turning on ignition key in ignition box to position 1 Car alarm is deactivated.
(switched off). Switching of the engine and taking out the ignition key
activates Car alarm (switches on for arming)..
RFID
Disarming is done by RFID tag. In case that at least one RFID tag is stored
in memory of Car alarm , after receiving this command, this mode will be
activated without reading of new tags . If none tag is stored in alarm
memory, reading of RFID tags activates.
RFIDN
Disarming is to be done by RFID tag.
After receiving this command reading of RFID tags activates.
ARM Arming permanently switched on.
DISARM Arming permanently switched off.
10