Z
Corporation
Z810
System
User
Manual
www.zcorp-users.com
90
10. Click ‘OK’. The software will ask you to
update the alignment. Click ‘OK’ to
update the printer’s configurations.
11. Remove the paper off the plate
carefully. If you would like to save the
sheet, remove the top edge of the
paper, adhere it to a blank sheet of
paper, and pull the blank sheet of
paper slowly.
12. Repeat steps 2-12 on a clean sheet of
alignment pad until all alignment
reticles line up at 0.
13. Look at target drawings to confirm alignment of print heads.
All bull's eyes are centered.
All targets are
evenly spaced.
14. Purge print heads after alignment
process with binder. This will clear print
heads of black ink and fill them will
clear binder. The process should take
about 10 minutes. The LCD will display
‘Online’ when the printer has
completed the purge process.
Technical Tip –
If you need to work in another dialogue box, click the close window button (X located on
the upper right-hand corner), NOT THE DONE OR CANCEL button. You may continue
purging. Complete the procedure by pressing the ‘Online’ button on the printer when
complete.
