YZ Systems DTEX DX1000G/L, Инструкция и руководство по эксплуатации, Страница: 38 / 40

Page 32 DX-1000G/L ver.05132020
Section 7: System Maintenance
Y Z S y s t e m s • 8 8 2 5 N . S a m H o u s t o n P k w y We s t • H o u s t o n , Te x a s • U S A • 7 7 0 6 4 • P : 2 8 1 . 3 6 2 . 6 5 0 0 • F : 2 8 1 . 3 6 2 . 6 5 1 3 Y Z S y s t e m s • 8 8 2 5 N . S a m H o u s t o n P k w y We s t • H o u s t o n , Te x a s • U S A • 7 7 0 6 4 • P : 2 8 1 . 3 6 2 . 6 5 0 0 • F : 2 8 1 . 3 6 2 . 6 5 1 3
Calibration/Inspection
For system integrity and accuracy, re-calibration
and inspection of the DTEX system is required at
least once every two years. Annual re-calibration
is available if required by local P.U.C., Company
Policy, etc. The unit displays the next sched-
uled calibration date at start up and also in the
information section, accessed via the keypad.
The system will continue to operate if past due
calibration, however all tests conducted with the
unit in this state will be identified as such.
To return the DTEX for calibration, please email
Techsupport@YZHQ.com for a RA form.