YZ Systems DTEX DX1000G/L Скачать руководство пользователя страница 37

Page 31

DX-1000G/L  ver.05132020

Section 7:  System Maintenance

Y Z   S y s t e m s   •   8 8 2 5   N .   S a m   H o u s t o n   P k w y   We s t   •   H o u s t o n ,  Te x a s   •   U S A  •   7 7 0 6 4   •   P :   2 8 1 . 3 6 2 . 6 5 0 0   •   F :   2 8 1 . 3 6 2 . 6 5 1 3

Maintenance 

The DTEX system essentially requires no in the 

field maintenance. 

There are NO field serviceable components. 

ALL service and re-calibration must be per

-

formed by the factory.

Please note the following items to insure trouble 

free service:

1. 

The unit requires annual re-calibration

The scheduled re-calibration date is displayed 

at power up and is also available by pressing 

the 

Info

 key at the main display screen. Refer 

to Section 12 for re-calibration information. We 

offer a 1 year recalibration or a 2 year recalibra

-

tion.

2. 

Recharge of the system battery

 will be re-

quired periodically. Battery condition is shown at 

the main display screen.

3. 

Do not expose the unit to debris

 - Damage 

Will Result! Keep lid closed and gas inlet capped 

when not in use. Keep air intake and sniff 

chamber clean.

4. 

Clean the unit with a damp cloth

. Avoid 

cleaners which could damage the display/key-

pad and possibly leave a residual odor.

5. 

Properly vent the unit after testing.

 Failure 

to vent gas from the unit after testing may lead to 

odor saturation of internal components.

6. 

Each instrument has its own unique 

background smell, just as each room has a 

smell peculiar to it.

 Every 30 days perform an 

exhaust background evaluation.  Without con-

necting gas to the inlet, power on the unit, open 

the flow valve fully and press 

P

 on the keypad to 

purge the unit. Purge for 2 minutes before clos-

ing valve and pressing 

Enter

 key to conclude the 

purge procedure. If after 2 minutes, smell per-

sists over and above normal background send 

unit to be serviced.

Recommended Spare Parts 

List:

Part #  

Description   

      

G2-0052 

DTEX Hose Assembly

G2-0067 

USB Download Cable ONLY 

 

G2-0050 

Power adapter assembly 

 

Содержание DTEX DX1000G/L









































Отзывы: