YX Motors YXQUAD X Скачать руководство пользователя страница 89

Страница: 89 / 159

Downhill

Check the terrain carefully before going downhill.

When possible, choose a path that lets you drive

your vehicle straight downhill. Choose your path

carefully and drive slowly enough to be able to re-

act to obstacles that you encounter.

For more traction and control, before going down

steeper and/or rougher slopes, shift into low gear

and select 4WD or 4WD Diff.Lock, Engine brak-

ing will help you go downhill slowly. Go as slowly

as possibe. If you begine to go too fast, apply the

brakes gently. Avoid hard application of the brakes,

which could cause the vehicle to slide.

If you are sliding or skidding, try to steer in the

direction the vehicle is sliding, to regain control.

For example, if you feel the back of the vehicle

start to slide to your right, steer to the right.

If you must turn on the hilll to avoid an obstacle,

do so slowly and carefully. If the vehicle starts to

tip, immediately steer in the downhill direction if

there are no obstacles in your path. As you regain

proper balance, gradually steer again in the direc-

tion you want to go.

7-21

Содержание YXQUAD X
































































































































































Результаты поиска

Содержание YXQUAD X

Отзывы:

YX Motors YXQUAD X, Руководство пользователя, Страница: 89 / 159

Результаты поиска

Содержание YXQUAD X

Отзывы: