YX Motors YXQUAD X Скачать руководство пользователя страница 54

Страница: 54 / 159

Check to see that the accelerator pedal operates

correctly. It must operate smoothly and spring back

to the idle position fully when released. Have a

dealer repair as necessary for proper operation.

Accelerator pedal

Make sure that the seat belts are not grayed, torn,

stretched, or damaged. The seat belt must move

smoothly when pulled out and retract on its own

when released. It must also lock up when quickly

pulled out. The latch plate should click securely

into the buckle and release when the release but-

ton is pushed firmly. Wash off any dirt or mud that

could affect operation. Have a dealer repair as

ncecessary for proper operation.

Seat belts

A crash can damage the restraint systems in your

vehicle. A damaged restraint system may not prop-

erly protect the person using it , resulting in seri-

ous injury or death in a crash, To help make sure

your restraint systems are working properly after

a crash, have them inspected and any necessary

replacements made as soon as possible.

Park on level ground. Turn the steering wheel right

and left. Check for excessive free play, abnormal

noises, or a rough feeling. Have a dealer repair as

necessary for proper operation.

Steering

Always check the tightness of chassis fittings and

fasterners before a ride. Take the vehicle to a dealer

or refer to the Service Manual for correct tighten-

ing torque.

Fittings and fasteners

5-8

Содержание YXQUAD X
































































































































































Результаты поиска

Содержание YXQUAD X

Отзывы:

YX Motors YXQUAD X, Руководство пользователя, Страница: 54 / 159

Результаты поиска

Содержание YXQUAD X

Отзывы: