YX Motors YXQUAD X Скачать руководство пользователя страница 69 | Manualshive

Страница: 69 / 159

YX Motors YXQUAD X Скачать руководство пользователя страница 69

As a YXQUAD X owner you are responsible for the
safe and proper operation of this vehicle. Read this
chapter and review the safety instructions in Chap-
ter 2 before operating the vehicle to instruct new
operators and passengers. Do not allow anyone
else to operate the vehicle or ride as a passenger
if you are unsure that he/she is willing and able to

follow these instructions.

KNOW YOUR VEHICLE

Follow these instructions to reduce your
risk of an accident and to reduce the
risk of serious injury or death in the
event of an accident.

BASIC GUIDE FOR

SAFE USE

This off-road vehicle will handle and maneuver dif-
ferently from cars, ATVs, go-carts, golf-cars and
grounds-keeping vehicles. This

X has higher

ground clearance and other features to handle
ruggeed terrain, and, as a result, can overtrun in
situations where some vehicles may not. This
would include vehicles made primarily for

pavement, roads, improved paths, or grounds-
keeping. If you do not use care in maneuvering

the

X, you can cause it to rolll over even on

flat,open areas.

7-1

YXQUAD

YXQUAD

«
...
67
68
69
70
71
...
»

Содержание YXQUAD X
































































































































































Отзывы:

Нет отзывов