YX Motors YXQUAD X Скачать руководство пользователя страница 14

Страница: 14 / 159

Prepare your vehicle

Perform the pre-operation checks each time you use the vehicle to make sure it is in safe operating

condition. Failure to inspect or maintain the vehicle properly increases the possibility of an accident or

equipment damage. See pages 5-1-5-2 for a list of pre-operation checks.

Prepare your load or trailer

Carrying loads, towing a trailer, or pulling objects can affect handling, stability, and risk of overturn or

other accidents.

Read Chapter 6 before loading, towing, or pulling objects.

Do not overload the vehicle or trailer. Refer to label in cargo bed for cargo bed load limit, Refer to

label next to hitch for tongue weight and trailer load limits.

Keep weight in the cargo bed centered side to side, and as low and as far forward as possible.

Secure cargo so that it will not shift - a loose load could change handling unexpectedly or be

thrown forward and strike occupants.

2-3

Содержание YXQUAD X
































































































































































Результаты поиска

Содержание YXQUAD X

Отзывы:

YX Motors YXQUAD X, Руководство пользователя, Страница: 14 / 159

Результаты поиска

Содержание YXQUAD X

Отзывы: