YX Motors YXQUAD X Скачать руководство пользователя страница 53

Страница: 53 / 159

Check the coolant level in the coolant reservoir

when the engine is cold (the coolant level will vary

with engine temperature).

Coolant

NOTICE

Hard water or salt water is harmful to
the engine. You may use soft water if
you cannot get distilled water.

The coolant level is satisfactory if it is between

the minumum and maximum level marks on the

coolant reservoir. If the coolant level is at or below

the minimum level mark. add additional coolant to

bring the level up to maximum level mark. If cool-

ant is not available, add distilled water. Change

the coolant every two years. (See pages 8-21_8-

22 for details)

Coolant reservoir capacity

( up to the maximum level mark:

0.32 L(0.28 lmp qt, 0.34 US qt)

Make sure the final gear oil is at the specified level.

Add oil as necessary. (See pages 8-16_8-18 for

details.)

Final gear oil

Recommended oil:

SAE 80 API GL-4 Hypoid gear oil

If desired, an SAE 80W90 hypoid gear oil may be

used for all conditions.

TIP

GL-4 is a quality and additive rating; GL-5 or GL-6

rated hypoid gear oils may also be used.

Differential gear oil

Make sure the differentilal gear oil is at the speci-

fied level. Add oil as necessary. (See pages 8-

19_8-21 for details.)

Recommended oil:

SAE 80 API GL-4 Hypoid gear oil

5-7

Содержание YXQUAD X
































































































































































Результаты поиска

Содержание YXQUAD X

Отзывы:

YX Motors YXQUAD X, Руководство пользователя, Страница: 53 / 159

Результаты поиска

Содержание YXQUAD X

Отзывы: