YX Motors YXQUAD X Скачать руководство пользователя страница 85

Страница: 85 / 159

Leaving the vehilce

Do not get out of the vehicle while the engine is

running and the drive select lever is in any gear.

There is a risk of injury because:

Children or others may accidentally press the

accelerator pedal.

Objects tossed into the vehicle may strike

the accelerator pedal.

The parking brake may not keep the vehicle

from acceleration.

Unwanted vehicle movement can cause serious

injury or death, and it may be dangerous to try to

stop the vehicle.

Parking on a flat area

When parking on a flat area, stop the engine and

shift the drive select lever into the neutral position.

Apply the parking brake to help prevent the ve-

hicle from rolling.

Parking on slope

The parking brake acts only on the rear wheels

when in 2WD. For the parking brake to take effect

on four wheel, shift to 4WD Diff.Lock before stop-

ping the engine.

If you park on a hill that is too steep the vehicle

may roll out of control, Never park on hills that are

so steep you cannot walk up them easily. If YOU

must park on an incline follow these instructions:

1. Bring the vehicle to a stop by applying the

brakes.

2. Put the vehicle in 4WD Diff.Lock.

3. Turn the engine off.

7-17

Содержание YXQUAD X
































































































































































Результаты поиска

Содержание YXQUAD X

Отзывы:

YX Motors YXQUAD X, Руководство пользователя, Страница: 85 / 159

Результаты поиска

Содержание YXQUAD X

Отзывы: