Install-Xander_Insert_BUILT-IN_ZC - 2021-11-25.docx www.yunca.co.nz
Page 9 of 18
N.
Floor Protector Reductions
N1.
The floor protector extension from the front of the unit
can be reduced if the unit is
elevated.
(Table 2)
* Measurements taken from the front of the (35mm thick) fascia.
Elevation Increase (mm)
0
50
100
150
200
* Protector Extension (mm)
500
464
421
366
300
Table 2. Floor Protector Reductions for Built-In Installations
O.
Xander ZERO CLEARANCE KIT Assembly
Note: The Xander
“Zero Clearance Kit” (for built-in installations) is supplied as a
flat pack and will require assembly before installation:
ITEM
DESCRIPTION
QTY
1
CASING PANEL ASSEMBLY
– BASE
1
2
CASING PANEL ASSEMBLY - LEFT SIDE
(SIDE-HOLE OPEN WITH RUBBER GROMMETS)
1
3
CASING PANEL ASSEMBLY
– RIGHT SIDE
(SIDE HOLE COVERED)
1
4
CASING PANEL ASSEMBLY
– BACK
1
5
CASING PANEL
– TOP INNER
1
6
CASING PANEL
– TOP OUTER
1
7
8G x 1/2 PAN POZI SELF TAPPER ZP (0013)
40
8
CASING SPIGOT ADAPTOR
1
Fig. 7
– Zero Clearance Kit parts breakdown
