Yukon HLS1500P, Инструкция по сборке, испытанию, эксплуатации, обслуживанию и хранению

Страница: 7 / 20

7
15 tonne Hydraulic Log Splitter Assembly, Installation, Care, Maintenance useage Instruction Manual
4.2. Assembling the wheel
CLOSELY INSPECT ALL LOG SPLITTER COMPONENTS.
(See Machine Components section on page 15-16 of this manual for diagram of components,)
• If you have missing components, contact the seller
• If you have damaged components, contact the seller
SAVE BOLTS FROM PACKAGING:
Some packaging bolts are used to assemble the log splitter, while others are used for attachments or spares
WARNING!
Turn the log splitter
(Part A)
over so the engine
is facing down
Place the wheel axle
(Part E)
Into the bracket on
the base so that the flanges are on the outside
of the frame in the log splitter.
(Part A)
Give a hard push to get into place.
Using the M10 wing nuts
(Part B1)
through the
holes on the bracket and tighten with a M10 nut
(Part B2)
Step 1
Step 2
Step 3
A
E
A
A
E
B1
B2
Yukon