Yukon HLS1500P, Инструкция по сборке, испытанию, эксплуатации, обслуживанию и хранению

Страница: 5 / 20

5
15 tonne Hydraulic Log Splitter Assembly, Installation, Care, Maintenance useage Instruction Manual
2.2. Application Conditions
3.1. Knowing your Log splitter
3.2. Before starting the log splitter
This log splitter is a home use model.
It is designed for operating under ambient temperatures
b5ºC and 40ºC and for installation at altitudes no
more than 1000m above M.S.L.
Before operating the log splitter,the oil level dipstick should be
loosened by some rotation until air can go in and out of the
oil tank smoothly. Air flow thru the oil level dipstick should be
detectable while the log splitter is under operations.
Before moving the log splitter,make sure the oil level dipstick is
tightened to avoid oil leaking from this point.
FAILED TO LOOSEN THE BLEED SCREW
WILL KEEP THE SEALED AIR IN HUDRAULIC
SYSTEM BEING COMPRESSED AFTER BEING
DECOMPRESSED.
SUCH CONTINUOUS AIR COMPRESSION AND
DECOMPRESSION WILL BLOW OUT THE SEALS
OF THE HYDRAULIC SYSTEM AND CAUSE
PERMANENT DAMAGE TO THE LOG SPLITTER.
A Max Pressure Limiting Screw DO NOT ADJUST THE MAX
PRESSURE LIMITING SCREW!
Max pressure was set before the log splitter ex work and the
max pressure limiting Screw is sealed to ensure the log splitter
works under pressure no more than 15 tons.
The setting was done by qualified mechanic with professional
instruments.
Unauthorized resetting will cause the hydraulic pump fail to
output enough splitting pressure or
RESULT IN SERIOUS
INJURY AS WELL AS DAMAGE TO THE MACHINE.
1. High pressure hydraulic oil hoses
2. Cylinder
3. Ball for operation handle
4. Gasoline engine
5. Wood Pusher
6. Wood support frame
7. Splitting wedge
8. Front support legs
9. Oil level dipstick
10. Wheel
11. Control valve
12. Operation handle
The surrounding humidity should less than 50% at 40ºC.
It can be stored or transported under ambient temperatures
between -25ºC and 55ºC.
3.0 PRE-SET UP AND OPERATION
10
11
12
9
8
7
6
5
4
3
2
1
Yukon