Yukon HLS1500P, Инструкция по сборке, испытанию, эксплуатации, обслуживанию и хранению

Страница: 17 / 20

17
15 tonne Hydraulic Log Splitter Assembly, Installation, Care, Maintenance useage Instruction Manual
9.0 SPECIFICATIONS
9.1. Log Specification & Guide
9.2. Log-Splitter Specification
Square log ends.
Logs that are not cut square
can slide out while splitting and become a safety
hazard or cause excessive force to log splitter
components. Use a chainsaw to cut logs square
on each end before attempting to split them into
single logs.
Max Log Size.
The diameter of the log is
indicative-a small log can be difficult to split when
is has knots, tough fiber or green. On the other
hand, it may not be difficult to split logs with
regular fibers even if its diameter exceeds the Max
Log size.
Split along grain. Do not use the log splitter to
split logs across the grain. Doing so will damage
the log splitter and could also cause pieces of log
to be thrown, injuring the operator or bystanders.
Warning. Splitting log that are not cut square or
has knots or tough fiber or green or not along the
grain will damage the log splitter which would not
be covered under the manufacture warranty
Model Number HLS150E
Max. Splitting Force 15 Ton
Power 196cc
Max. Ram Travel
Cycle time
390mm
16s
Engine 6.5HP / 4.8KW 3600rpm
Max. Splitting Length
Max Splitting Diameter
520mm
70-350mm
Wheel Size 10”
Max Splitting Length:
Hydraulic Oil Capacity
520mm
4L
The manufacturer reserves the right to make improvements in design and/or changes
in specifications at any time without incurring any obligation to install them on units
previously sold
IMPORTANT
70 -350mm 520mm
Max Splitting
Length
Max Splitting
Diameter
Yukon