Yukon HLS1500P, Инструкция по сборке, испытанию, эксплуатации, обслуживанию и хранению

Страница: 11 / 20

11
15 tonne Hydraulic Log Splitter Assembly, Installation, Care, Maintenance useage Instruction Manual
5.0 PRE-CHECKS BEFORE OPERATIONS
Before operating the log splitter, the Bleed Screw should be loosened by some rotations
until air can go in and out of the oil tank smoothly.
Air flow thru the Bleed Screw hole should be detectable during the log splitter
is under operations.
Before moving the log splitter, make sure the Bleed Screw is tightened to avoid
oil leaking from this point.
DO NOT ADJUST THE MAX PRESSURE LIMITING SCREW!
Max pressure was set before the log splitter ex work and the max pressure limiting screw is
sealed with glue to ensure the log splitter works under pressure no more than 8 tons.
The setting was done by qualified mechanic with professional instruments.
Unauthorized resetting will cause the hydraulic pump fail to output enough splitting pressure
or RESULT IN SERIOUS INJURY AS WELL AS DAMAGE TO THE MACHINE.
FAILED TO LOOSEN THE BLEED SCREW WILL KEEP THE SEALED AIR IN HYDRAULIC
SYSTEM BEING COMPRESSED AFTER BEING DECOMPRESSED.
SUCH CONTINUOUS AIR COMPRESSION AND DECOMPRESSION WILL BLOW OUT THE
SEALS OF THE HYDRAULIC SYSTEM AND CAUSE PERMANENT DAMAGE TO THE LOG
SPLITTER.
WARNING!
5.1. Select location
• Select an appropriate location for operating the log
splitter.
• Dry-level surface with good footing. Stay clear of areas
with mud, ice, tall grass, weeds, brush, or snow.
• If you start to feel sick, dizzy, or weak while using the log
splitter, shut off the engine and get to fresh air
RIGHT
AWAY
, See a doctor You may have carbon monoxide
poisoning.
• Block the wheels to prevent unintended movement of the
log splitter.
• Place a block behind the jockey wheel
Yukon