Yukon HLS1500P, Инструкция по сборке, испытанию, эксплуатации, обслуживанию и хранению

Страница: 13 / 20

13
15 tonne Hydraulic Log Splitter Assembly, Installation, Care, Maintenance useage Instruction Manual
7.0 ENGINE START-UP GUIDE
BEFORE STARTING.
check and fill engine with approximately 0.6 litres
SAE10W-30oil. Fill the fuel tank with 93+ octane unleaded gasoline
NOTE: This engine includes an automatic low oil shut down sensor that disables the engine if the oil level is too low
7.1. Starting the Engine
Open the gas valve by moving to the right.
Close the choke by moving it to the left.
Note: If the engine is already hot, it is not
necessary to close.
Open the throttle by moving to the left
(rabbit symbol) See Bottom
Turn the engine switch to the on position.
Gently pull the recoil starter handle until it
engages, then pull it all the way out in a rapid
pull. May take 5 pulls to start.
Once the engine starts, move the choke to 1/2
choke position. After 15 seconds, open choke
by moving to right.
Note: Moving the choke too fast can kill
the engine.
Step 1
Step 2
Step 3
Yukon