YSI 1500 Sport Скачать руководство пользователя страница 89 | Manualshive

Страница: 89 / 134

YSI 1500 Sport Скачать руководство пользователя страница 89

9

9

9

9----3

3

3

3

We recommend at this point that you contact YSI Customer Service as this is a
system failure that may require returning the instrument.

The second option is to select YES which will reformat the SPORT memory.
The software will attempt to correct itself but in doing so ALL stored data will
be lost. If YES was selected, the stir speed, date and time must also be reset.
Refer to Section 3 Instrument Setup for more information if necessary.

IMPORTANT:

IMPORTANT:

IMPORTANT:

IMPORTANT: Any previously stored sample results will be permanently erased
by selecting YES.

BAD RAM DATA

BAD RAM DATA

BAD RAM DATA

BAD RAM DATA
PRESS ENTER

PRESS ENTER

PRESS ENTER

PRESS ENTER

A check is done of all stored data after each sample cycle, if there is a
discrepancy this message will be displayed.

OK TO LOSE DATA?

OK TO LOSE DATA?

OK TO LOSE DATA?

OK TO LOSE DATA?
NO

NO

NO

NO ----0 YES

0 YES

0 YES

0 YES ----1

1

1

1

Two options exist at this point, one is to select NO and save your data and
decide not to continue. Choosing this option will display the following:

POWER DOWN

POWER DOWN

POWER DOWN

POWER DOWN
CONSULT MANUAL

CONSULT MANUAL

CONSULT MANUAL

CONSULT MANUAL

We recommend at this point that you contact YSI Customer Service as this is a
system failure that may require returning the instrument.

The second option is to select YES which will reformat the SPORT memory.
The software will attempt to correct itself but in doing so ALL stored data will
be lost. If YES was selected, the stir speed, date and time must also be reset.
Refer to Section 3 Instrument Setup for more information if necessary.

IMPORTANT:

IMPORTANT:

IMPORTANT:

IMPORTANT: Any previously stored sample results will be permanently erased
by selecting YES.

INJECT TIMEOUT

INJECT TIMEOUT

INJECT TIMEOUT

INJECT TIMEOUT
PRESS MENU

PRESS MENU

PRESS MENU

PRESS MENU

This message will be displayed if, after being prompted to inject either a
calibrator or a sample, 5 minutes passes.

Pressing MENU

MENU

MENU

MENU will move you to the previous menu from where you will be

allowed to continue once more.

«
...
87
88
89
90
91
...
»

Содержание 1500 Sport







































































































































Отзывы:

Нет отзывов