manualshive.com logo in svg

YSI 1500 Sport, Руководство пользователя, Страница: 11 / 134

Поделиться
Скачать
YSI 1500 Sport Скачать руководство пользователя страница 11

 

 

3

3

3

3----1

1

1

1  

3. Instrument Setup 

We urge you to read through the entire Operations Manual before starting to use 
the SPORT. Though the SPORT was designed for ease of operation, prompting 
you through each operational step, it is still helpful to know as much as possible 
about the instrument in order to get the most out of it. 

3.1 Unpacking 

Remove the instrument from its shipping container. Be careful not to discard 
any parts or supplies. Check off all items on the packing list and inspect all 
assemblies and components for damage. If any parts are damaged or missing, 
contact YSI Customer Service or your Dealer Representative immediately. 

Do not discard the shipping container. 

If servicing is required, the instrument must be returned to the YSI Repair 
Center. Field service is not available on this instrument. We strongly recommend 
that you use the original shipping container for this purpose as it was designed 
to protect the instrument during transport. 

Reagents and injection devices for the SPORT analyzer are not packaged in the 
same carton as the instrument. Reagents come in a starter kit (YSI 1504); and 
injection devices (YSI 1501 or 1502) must be ordered separately. 

 

 WARNING:  Always make sure the SPORT power is turned 

off prior to connecting the battery charger. Failure to do 
this could result in stored data corruption if the battery 
has been discharged to a very low level. 

 

Содержание 1500 Sport







































































































































Отзывы:

Нет отзывов