YOYOMOTION YOYORouter EE1, Руководство пользователя

Страница: 62 / 71

62
4. Troubleshooting
This Chapter provides solutions to problems for the installation and operation of the
YOYORouter. You can refer to the following if you are having problems.
4.1. Basic Problems
YOYORouter does not switch on – indicator lights all off
x
The battery may be fully discharged – connect the charger and try again
x
The battery may be incorrectly inserted – check that the gold contacts on the battery
line up with the contacts in the battery compartment
How to reset YOYORouter to factory state
Your YOYORouter can be reset to its factory state. This is useful if you have changed and
forgotten the W-Fi network name (SSID) or Wi-Fi password.
To reset YOYORouter:
1. Switch on YOYORouter in Modem mode
2. Locate the Reset switch on the rear of YOYORouter B1.
3. Use a pencil or other tool, insert it in the Reset hole and gently press the Reset switch
for at least 8 seconds.
4. YOYORouter restarts.
After Reset, YOYORouter will make its default configuration, which is suitable for most users.
If necessary, re-configure your YOYORouter to your own needs.
The Wi-Fi network will have been changed to a network name (SSID) like
YOYORouter-12-34
where the numbers are particular to your example and printed on the label on the device itself
and the carton in which it was supplied. The password is also printed on the label.
4.2. Wi-Fi Problems
I cannot find the Wi-Fi network
By default, YOYORouter’s Wi-Fi network name (SSID) is like
YOYORouter-12-34
where the
numbers are particular to your example and printed on the label on the device itself and the
carton in which it was supplied.
x
Try moving closer to YOYORouter
x
On the device you are trying to connect, request it to re-scan for networks and see if
YOYORouter-xx-xx appears.
If you have configured your YOYORouter to hide the SSID, it will not appear in the network list
on any device you try to connect.
x
You must select manual configuration and enter the network name and password.
x
Or you must change the setting Advanced > Wireless > SSID Broadcast to Enable
(you need a device connected to YOYORouter to be able to access the settings)
I can’t connect to the Wi-Fi network
x
Move YOYORouter and the wireless client into the same room, and then test the
wireless connection.
x
Turn off YOYORouter and the client, then restart it and then turn on the client again.
x
Make sure that you have selected the YOYORouter network.
x
Make sure you have entered the correct password.