29
E. PPTP
1.
Activate WWAN for Auto-Failover
: With this function enabled, when the Ethernet WAN
connection is broken, the device will automatically activate the WWAN connection
and keep you connected to internet with the alternative WWAN broadband service.
Meanwhile, if the device detected that the Ethernet WAN connection is recovered, your
broadband connection will be switched to use the Ethernet WAN service
2.
IP Mode
: Please check the IP mode your ISP assigned, and select “Static IP Address” or
“Dynamic IP Address”.
3.
My IP Address
and
My Subnet Mask
: The private IP address and subnet mask your ISP
assigned to you.
4.
Router IP
and
Server IP Address/Name
: The IP address of the PPTP server and
designated Router provided by your ISP.
5.
PPTP Account
and
Password
: The account and password your ISP assigned to you.
If you don't want to change the password, keep it blank.
6.
Connection ID
: Optional. Input the connection ID if your ISP requires it.
7.
Maximum Idle Time
: the time of no activity to disconnect your PPTP session. Set it
to zero or enable “Auto-reconnect” to disable this feature. If Auto-reconnect is enabled,
this device will connect with ISP automatically after system is restarted or
connection is dropped.
8.
Connection Control
: There are 3 modes to select:
Connect-on-demand
: The device will link up with ISP when the clients send
outgoing packets.
Содержание YOYORouter EE1
Страница 9: ...9 4 Connect the power cord and plug in the AC adaptor 5 Turn on YOYORouter EE1 ...
Страница 21: ...21 Step 5 Click Finish to close the Wizard Note The router has already restarted ...
Страница 38: ...38 Press Fixed Mapping and the DHCP Server will reserve the special IP for designated MAC address ...