YOYOMOTION YOYORouter EE1, Руководство пользователя

Страница: 11 / 71

11
2.5. Setting up YOYORouter EE1 in Wireless WAN Mode
Note: A full list of supported USB modems is available from the
Supported Cards List
link in the
status page, or from www.yoyomotion.com.
1. Make sure your SIM card is installed in the USB modem. Consult the USB Modem’s
documentation for further information.
2. Plug in your USB Modem and turn on YOYORouter EE1. Allow at least 60 seconds for the USB
modem to be detected and configured.
In most cases YOYORouter EE1 self-configures and operates in Wireless WAN Mode using
default settings. You may need to customize the settings, for example in the following cases:
x
Your SIM requires a PIN Code.
x
Your mobile broadband subscription requires different settings to those that YOYORouter
selected by default.
x
You have special mobile broadband settings, for example a private APN (Access Point
Name).
x
You wish to change Wi-Fi settings.
To customize settings:
3. Connect to YOYORouter via Wi-Fi or Ethernet, access the status page at http://192.168.1.1
and log in.
4. Select
Wizard
and step through the Setup wizard until you reach step
Select WAN Type.
x
Select
WAN Interface
option
Wireless WAN.
x
Select
WAN Type 3G.
5. 3G Mobile Network Settings
x
Connection settings are normally selected automatically from your SIM.
x
Select
Dial-Up Profile
option
Manual
at the 3G step if you need to select alternative or
enter special settings. Select your country and the network operator, or
Others
to enter
your own settings.
x
If your SIM requires a PIN code, enter it now.