20
NOTE:
-
Once the alert is triggered, the alarm will sound for 2 minutes and the related alert icon and
readings will flash.
-
If the alert alarm is automatically off after 2 minutes, the alert icon and readings will still keep
flash until the weather reading is out of the alert range.
-
The weather alert will sound again when the weather readings falls into the alert range again.
MAINTENANCE
BATTERY REPLACEMENT
If the low battery indicator “ ” displayed in OUT
or CH section, it indicates that the current channel
wireless or outdoor 5-in-1 sensor battery power
is low. You should replace all the batteries in the
current channel sensor at once .
CLEANING THE RAIN COLLECTOR
1 .
Unscrew the rain collector by turning it 30°anti-clockwise.
2 .
Gently remove the rain collector.
3 .
Clean and remove any debris or insects.
4 .
Install the collector when it is clean and fully dried.
N
N
“Unlock” Position
“Lock” Positio
n
N
CLEANING HYGRO-THERMO SENSOR OF WIRELESS 5-IN-1 SENSOR
1 .
Remove the 2 screws at the bottom of the radiation shield.
2 .
Gently pull out the shield.
3 .
Carefully remove any dirt or insects on the sensor casing (do not
let the sensors inside get wet).
4 .
Clean the shield with water to remove any dirt or insects.
5 .
Install all the parts back when they are clean and fully dried.
PRECAUTIONS
-
Keep and reading the “User manual” is highly recommended. The manufacturer and
supplier cannot accept any responsibility for any incorrect readings, export data lost and any
consequences that occur should an inaccurate reading take place.
-
This product is designed for use in the home only as indication of weather conditions. This
product is not to be used for medical purposes or for public information
-
Do not subject the unit to excessive force, shock, dust, temperature or humidity.
-
Do not cover the ventilation holes with any items such as newspapers, curtains etc.
-
Do not immerse the unit in water. If you spill liquid over it, dry it immediately with a soft, lint-
free cloth .
-
Do not clean the unit with abrasive or corrosive materials.
-
Do not tamper with the unit’s internal components. This invalidates the warranty.
-
Placement of this product on certain types of wood may result in damage to its finishing
for which manufacturer will not be responsible. Consult the furniture manufacturer’s care
instructions for information.
-
Only use fresh batteries. Do not mix new and old batteries.
-
Only use attachments / accessories specified by the manufacturer.
-
Images shown in this manual may differ from the actual display.
-
When disposing of this product, ensure it is collected separately for special treatment.
-
Dispose of used batteries according to the instructions.
