16
WIRELESS SENSOR SIGNAL RECEIVING
1 .
The console display signal strength for the wireless 5-IN-1 sensor, as per table below:
No signal
Weak signal
Good signal
2 .
If the signal has discontinued and does not recover within 15 minutes, the signal icon will
disappear. The temperature and humidity will display “Er” for the corresponding channel.
3 .
If the signal does not recover within 48 hours, the “Er” display will become permanent. You
need to replace the batteries and then press
[ SENSOR / WI-FI]
key to pair up the sensor
again .
VIEW THE OUTDOOR CHANNEL (OPTIONAL FEATURE WITH ADD ON EXTRA
THERMAL HYGRO SENSORS)
This console is capable to pair with a wireless 5-IN-1 sensor and up to 7 wireless thermal-hygro
sensors. If you have 2 or more sensors, you can press
[ CHANNEL ]
key to switch between
different wireless channels in normal mode, or press and hold
[ CHANNEL ]
key for 2 seconds
to toggle auto-cycle mode to display the connected channels at 4 seconds interval.
During auto-cycle mode, press
[ CHANNEL ]
key to stop auto cycle and display the current
channel .
WIND
WIND SPEED AND DIRECTION SECTION OVERVIEW
Past wind
directions indicator
of last 5 minutes
Real time wind
direction indicator
Average / gust
wind speed
TO SET THE WIND SPEED UNIT AND DIRECTION DISPLAY FORMAT
1 .
In normal mode, press and hold
[ WIND ]
key for 2 seconds to enter into wind speed unit
mode and the unit will flash. Press
[ ]
or
[ ]
key to change the wind speed unit in this
sequence: m/s
→
km/h
→
knots
→
mph
2 . Press
[ WIND ]
key again to return to normal mode.
TO SELECT THE WIND DISPLAY MODE
In normal mode, press
[ WIND ]
key to switch between
AVERAGE
and
GUST
wind speed.
WEATHER INDEX
At the WEATHER INDEX section, you can press
[ INDEX ]
key to view the weather index in this
sequence:
FEELS LIKE → HEAT INDEX → WIND CHILL → DEWPOINT.
FEELS LIKE
The feels like temperature index determine how the outdoor temperature that people actually
feel .
