14
MOON PHASE
The moon phase is determined by
the time, date and time zone. The
following table explains the moon
phase icons of the Northern and
Southern hemispheres. Please refer
to
ORIENTING THE 5-IN-1 SENSOR
TOWARDS SOUTH
section about
how to setup for the Southern
hemispheres.
Northern
hemisphere
Moon Phase
Southern
hemisphere
New Moon
Waxing Crescent
First quarter
Waxing Gibbous
Full Moon
Waning Gibbous
Third quarter
Waning Crescent
POINTING THE WIRELESS 5-IN-1 SENSOR TO SOUTH
The outdoor 5-IN-1 sensor is calibrated to point to North for the maximum accuracy. However,
for the user's convenience (e.g. users in the Southern hemisphere), it is possible to use the
sensor with the wind vane pointing to South.
1 .
Install the 5-IN-1 wireless sensor with its wind meter end pointing to South. (Please refer to
INSTALLATION OF THE WIRELESS SENSOR
for mounting details)
2 .
In normal mode of the console, press and hold
[ INDEX ]
key for 10 seconds to enter into
the calibration mode, then press
[ INDEX ]
key again until the “N” icon appears on the left
botton corner of the LCD to enter into the sensor orientation mode
3 . Use
[ ]
or
[ V ]
key to change to lower part (Southern Hemisphere).
4 . Press
[ INDEX ]
key to confirm and exit.
NOTE:
-
Changing the hemisphere setting will automatically switch the direction of the moon phase on
the display.
SETTING ALARM TIME
1 .
In normal time mode, press and hold
[ ALARM ]
key for 2 seconds until the alarm hour digit
flashes to enter alarm time setting mode.
2 . Press
[ ]
or
[ ]
key to change the value. Press and hold the key for quick-adjust.
3 . Press
[ ALARM ]
key again to step the setting value to Minute with the Minute digit flashing.
4 . Press
[ ]
or
[ ]
key to adjust the value of the flashing digit.
5 . Press
[ ALARM ]
key to save and exit the setting.
NOTE:
-
In alarm mode, the “ ” icon will display on the LCD.
-
The alarm function will turn on automatically once you set the alarm time.
