York eco YCAS Series Скачать руководство пользователя страница 13

Страница: 13 / 232

YORK INTERNATIONAL

FORM 201.18-NM9 (602)

ment without first switching OFF, isolating and locking-

off the power supply. Work on live equipment must only

be carried out by suitably trained and qualified person-

nel. No attempt should be made to gain access to the

control panel or electrical enclosures during normal op-

eration of the unit.

Rotating Parts

Fan guards must be fitted at all times and not removed

unless the power supply has been isolated. If ductwork

is to be fitted, requiring the wire fan guards to be re-

moved, alternative safety measures must be taken to

protect against the risk of injury from rotating fans.

Sharp Edges

The finning on the air-cooled condenser coils has sharp

metal edges. Reasonable care should be taken when

working in contact with the coils to avoid the risk of

minor abrasions and lacerations. The use of gloves is

recommended.

Refrigerants and Oils

Refrigerants and oils used in the unit are generally non-

toxic, non-flammable and non-corrosive, and pose no

special safety hazards. Use of gloves and safety glasses

are, however, recommended when working on the unit.

The build up of refrigerant vapor, from a leak for ex-

ample, does pose a risk of asphyxiation in confined or

enclosed spaces and attention should be given to good

ventilation.

High Temperature and Pressure Cleaning

High temperature and pressure cleaning methods (e.g.

steam cleaning) should not be used on any part of the

pressure system as this may cause operation of the pres-

sure relief device(s). Detergents and solvents which may

cause corrosion should also be avoided.

EMERGENCY SHUTDOWN

In case of emergency, the electrical option panel is fit-

ted with an emergency stop switch CB4 (3 System) or

CB5 (4 System) located in the bottom right of the Mi-

croprocessor Panel. Separate Circuit Breakers, CB1

(System 1), CB2 (System 2), CB3 (System 3), and CB4

(System 4) can also be used to stop the respective sys-

tem in an emergency. When operated, it removes the

electrical supply from the control system, thus shutting

down the unit.

Содержание eco YCAS Series









































































































































































































































Результаты поиска

Содержание eco YCAS Series

Отзывы:

Похожие инструкции для eco YCAS Series

Бренды по названию

Популярные бренды

York eco YCAS Series, Руководство пользователя

Результаты поиска

Содержание eco YCAS Series

Отзывы:

Похожие инструкции для eco YCAS Series

Бренды по названию

Популярные бренды