Yokomo YZ-114 Plus, Инструкция по эксплуатации

Страница: 16 / 24

· 06 07 · YZ-114 PLUS YZ-114 PLUS
CHARGER COMPONENTS PROGRAM FLOW DIAGRAM
■ Warnings regarding Charging
Always follow refer to the instructions accompanying the battery regarding recommended charging current and
charging time. Lithium batteries should be charged according to the directions given by the manufacturer. Do
not attempt to quick charge (fast charge) batteries which do not explicitly state that it is capable of quick or fast
charge.
■ Warnings regarding Discharging
Pay particular attention to discharge voltage to avoid over-discharging the battery. Lithium batteries cannot be
discharged below the minimum recommended voltage, or else the battery can rapidly lose capacity or may be
totally and permanently damaged. In general, lithium batteries do not require discharging.
NiCd and NiMH batteries are said to have a memory effect. If they are recharged before the entire charge is
used, the memory effect will cause only that capacity to be used in subsequent charges.
Resume or Start
Charge Processes
Alter Values
See the Status of Individual
Cells in Balance Charge Mode
Scroll Through the Main Menu
Stop Any Charge Processes
Output Socket
4mm Banana
Plug
Balance Lead Socket
Micro USB Port for
PC Link / WiFi Module
Connection
Temp erature
Sensor Port
USB Port
LCD Display
AC Input
100-240V
DC Input
11-18V
Cooling Fan
Balance Lead Socket
BATT/PROGRAM
Pb BATT
ENTER
START
Pb CHARGE
2.0A 2.0V (1P) Pb DISCHARGE
0.1A 2.0V (1P)
BATT/PROGRAM
NiCd BATT
NiCd CHARGE
CURRENT 2.0A
ENTER
START NiCd DISCHARGE
0.1A CUT: 1.0V NiCd CYCLE
CHG>DCHG
1
BATT/PROGRAM
NiMH BATT
ENTER
START NiMH CHARGE
CURRENT 2.0A NiMH DISCHARGE
0.1A CUT: 1.0V NiMH CYCLE
CHG>DCHG 1
BATT/PROGRAM
LiPo BATT
LiPo BALANCE CHG
2.0A 7.4V (2S) LiPo CHARGE
2.0A 7.4V (2S) LiPo FAST CHARGE
2.0A 7.4V (2S) LiPo STORAGE
2.0A 7.4V (2S) LiPo DISCHARGE
2.0A 7.4V (2S)
ENTER
START
BATT/PROGRAM
LiFe BATT
Lilo BALANCE CHG
2.0A 7.2V (2S) Lilo CHARGE
2.0A 7.2V (2S) Lilo FAST CHARGE
2.0A 7.2V (2S) Lilo STORAGE
2.0A 7.2V (2S) Lilo DISCHARGE
2.0A 7.2V (2S)
ENTER
START
BATT/PROGRAM
LiIo BATT
LiFe BALANCE CHG
2.0A 6.6V (2S) LiFe CHARGE
2.0A 6.6V (2S) LiFe FAST CHARGE
2.0A 6.6V (2S) LiFe STORAGE
2.0A 6.6V (2S) LiFe DISCHARGE
2.0A 6.6V (2S)
ENTER
START
BATT/PROGRAM
BATT METER
4.20 4.19 4.19 V
0.00 0.00 0.00 V MAIN 0.00V
H0.000V L0.000V
NiCd RE-PEAK
1
NiMH RE-PEAK
1 NiMH Auto CHARGE
CURRENT 2.0A
NiCd Auto CHARGE
CURRENT 2.0A
LiHV BALANCE CHG
2.0A 7.6V (2S) LiHV CHARGE
2.0A 7.6V (2S) LiHV FAST CHARGE
2.0A 7.6V (2S) LiHV STORAGE
2.0A 7.6V (2S) LiHV DISCHARGE
2.0A 7.6V (2S)
BATT/PROGRAM
LiHV BATT
ENTER
START
BATT/PROGRAM
BATT MEMORY
ENTER
START
[ BATT MEMORY 1 ]
ENTER SET->
ENTER
START
BATT TYPE
LiPo
BATT VOLTS
7.4V ( 2S )
CHARGE CURRENT
4.9A DSCH CURRENT
2.2A DSCH VOLTAGE
3.0V/CELL
TVC=YOUR RISK
4.20V
ENTER
START
ENTER
START
BATT/PROGRAM
SYSTEM SETTING->
ENTER
START
Stop
Batt Type
SAVE PROGRAM
ENTER SAVE PROGRAM
SAVE…. [ BATT MEMORY 1 ]
LiPo 7.4V (2S ) [ BATT MEMORY 1 ]
C:4.9A D:2.2A
ENTER CHARGER
LOAD……
LiPo BALANCE CHG
4.9A 7.4V(2S) LiPo CHARGE
4.9A 7.4V(2S) LiPo FAST CHARGE
4.9A 7.4V(2S) LiPo STORAGE
4.9A 7.4V(2S) LiPo DISCHARGE
2.2A 7.4V(2S)
BATT TYPE
MiMH BATT VOLTS
2.4V (2S)
ENTER
START
CHARGE CURRENT
3.3A TRICKLE
100mA PEAK DELAY
1Min
DSCH CURRENT
2.2A DSCH VOLTAGE
1.1V/CELL
SAVE PROGRAM
ENTER
ENTER
START
BATT TYPE
Pb
BATT VOLTS
4.0V (2P)
CHARGE CURRENT
3.3A DSCH CURRENT
1.5A
DSCH VOLTAGE
1.7V/CELL
SAVE PROGRAM
ENTER
DEC INC
BATT/PROGRAM
BATT RESISTANCE
ENTER
START
005 003 003 m
Ω
005 m
Ω
TATAL
:
16m
Ω
H
:
5m
Ω
L
:
3m
Ω
ENTER
START
STARG
/
ENTER
>
3 Seconds
SAVE PROGRAM
SAVE….
ENTER
START [ BATT MEMORY 2 ]
NiMH 2.4V (2S )
[ BATT MEMORY 2 ]
C:1.0A D:1.0A
STARG
/
ENTER
>
3s
ENTER CHARGER
LOAD……
NiMH CHARGE
CURRENT 1.0A NiMH Auto CHARGE
CURRENT 1.2A NiMH DISCHARGE
1.0A CUT: 2.0V NiMH RE-PEAK
2 NiMH CYCLE
DCHG>CHG 1
[ BATT MEMORY 2 ]
ENTER SET->
[ BATT MEMORY 3 ]
ENTER SET->
SAVE PROGRAM
SAVE….
ENTER
START [ BATT MEMORY 3 ]
Pb 4.0V (2S )
[ BATT MEMORY 3 ]
C:3.3A D:1.5A ENTER CHARGER
LOAD…… Pb CHARGE
3.3A 4.0V(2P)
Pb DISCHARGE
1.5A 4.0V(2P)
Rest Time
CHG>DCHG 10Min Safety Timer
ON 120Min Capacity Cut-Off
ON 5000mAH Temp Cut-Off
ON 50°C 122°F NiMH Sensitivity
D.Peak Default
NiCd Sensitivity
D.Peak Default
Key Beep ON
Buzzer ON Version
HW:1.00 FW: 1.12 Load Factory Set
Enter Input Power Low
CUT-OFF 11.0V Bal. Connection
OFF
Temperature Unit
Celsius
ENTER
START
START ENTER > 3s
Serial Number:
81465535