Yokomo YZ-114 Plus, Инструкция по эксплуатации

Страница: 14 / 24

03 · · 02 YZ-114 PLUS YZ-114 PLUS
■
Battery Charge/Discharge Profiles
YZ-114PLUS can store up to 10 profiles for either charging or discharging in memory.
■ Terminal Voltage Control (TVC)
Expert users can set the end voltage for the charge process.
■ Internal Lithium Battery Balancer
YZ-114PLUS comes equipped with an individual-cell voltage balancer. Using an external balancer
for balance charging is not necessary.
■ Support for Balance Discharging
YZ-114PLUS can monitor and balance the voltage of each cell individually during the discharging
process. A safety feature will automatically stop the discharge process if any of the cells exhibits
an abnormal voltage.
■ Support for Multiple Types of Lithium Batteries
YZ-114PLUS supports various lithium batteries including LiPo, LiIon, and LiFe.
■ Standard Equipped with LiHV Mode
YZ-114PLUS supports "LiHV" batteries; the new generation of LiPo batteries which have an end
charge voltage of 4.35 V.
FEATURES
※
WARNING: When using LiHV mode, be certain that the LiPo battery is a HV (high-
voltage) type which is 3.8 V per cell. NEVER attempt to use the LiHV mode with
conventional 3.7 V cell LiPo batteries, as it can cause fires and explosions leading to
personal injuries and property damage.
■
Fast Charge and Storage Charge Modes for Lithium Batteries
YZ-114PLUS comes equipped with a Fast Charge mode to reduce charging times for batteries
which support fast charging. In addition, a Storage mode is available to adjust the final voltage of
the battery to an optimal level to extend the useful life of the battery while being stored.
■ Re-peak Mode for NiMH and NiCd Batteries
In re-peak mode, the charge will perform a peak charge on the battery 1 to 3 times in a row
automatically. This mode can be used to ensure that a battery will be fully charged.
■ Adjustable Delta-peak Sensitivity for NiMH and NiCd Batteries
YZ-114PLUS contains an automatic charging termination feature based on the delta-peak voltage
detection principle. When the battery's voltage exceeds the user adjustable threshold, the
charging process will be automatically stopped.
■ Cycling Charge and Discharge Processes
YZ-114PLUS is equipped with automatic cyclic charge and discharge mode which can be
performed 1 to 5 times in a row. This process can be performed to refresh and balance the battery
in order to stimulate its activity.
■ Automatic Charging Current Limit
With YZ-114PLUS, it is possible to set the maximum charging current for NiMH and NiCd
batteries. This is useful for charging NiMH batteries with low internal resistance and capacity while
using the "AUTO" charging mode.
■ LiPo Battery Meter
YZ-114PLUS contains a battery meter that can be used to check the battery's total voltage, along
with the highest and lowest voltage along with the voltage of each of the individual cells.
■ Battery Internal Resistance Meter
YZ-114PLUS contains a battery internal resistance meter that can be used to check the battery's
total internal resistance, along with the internal resistance of each of the cells.
■ Charge Capacity Limit
An user-adjustable charge capacity limit can be set to automatically terminate the charge process
when the set charge capacity is reached.
■ Temperature Limit
Batteries warm up while charging and discharging. By using this feature, if the battery heats up
toa set temperature the process will be stopped. Note: Optional temperature probe (Part No. YZ-
114P-2) is required to use this feature.
■ Processing Time Limit
Using this feature, when the charge or discharge process takes longer than the set time, the
process will be automatically stopped.
FEATURES