YOKOGAWA ZR202S, Руководство пользователя, Страница: 70 / 163

<7. Startup>
7-7
IM 11M13A01-04E
7.4.5 Changing Set Values
(1) Selecting numeric values from among preset values
Switch operation Display Description
> ∧
ENT
0
The set value is displayed after the parameter code selection. An example of how
to select either 0, 1, or 2 as the set value is given below.
(The currently set value is 0.)
> ∧
ENT
1
Touch the [ ∧ ] key once to change the current value from 0 to 1.
> ∧
ENT
2
Touch the [ ∧ ] key again to change to the numeric value to 2.
> ∧
ENT
0
If you touch the [ ∧ ] key again, the numeric value will return to 0.
Continuously touch the [ ∧ ] key, and the numeric values will change continuously.
> ∧
ENT
C 01
Display the desired numeric value and touch the [ENT] key.
The display will then return to the parameter code selection
(2) Entering numeric values such as oxygen concentration values and factors
Switch operation Display Description
> ∧
ENT
0 0.0
The set value is displayed after the parameter code selection.
An example of entering “9.8” is given below. (The currently set value is 0.0)
> ∧
ENT
0 0 .0
Touch the [ > ] key to move the position of the digit that is flashing to the digit to
be changed. Continuously touch the [ > ] key, and the position of the digit that is
flashing will move continuously to the right.
> ∧
ENT
0 9 .0
Touch the [ ∧ ] key to set the numeric value to 9.
Continuously touch the [ ∧ ] key, and the numeric value will change in sequence
from 0 to 1 to 2 to 3 … to 8 to 9 and back to 0.
> ∧
ENT
09. 0
Touch the [ > ] key to move the position of the digit that is flashing to the right.
> ∧
ENT
09. 8
Touch the [ ∧ ] key to set the numeric value to 8.
> ∧
ENT
09.8
Where the correct numeric value is displayed, touch the [ENT] key.
> ∧
ENT
09.8
If you touch the [ENT] key again, the flashing stops and the current set value will
be in effect.
> ∧
ENT
C 11
Touch the [ENT] key once again to return to the parameter code selection display.
(3) If invalid numeric values are entered.
Switch operation Display Description
> ∧
ENT
98.0
If an invalid numeric value (beyond the input range specified) is entered,
“Err” will appear for two seconds after touching the [ENT] key.
> ∧
ENT
Err
> ∧
ENT
0 0.0
“Err” appears for two seconds, and the display returns to the first set value.
Re-enter the numeric value.