<7. Setting Parameters>
7-1
IM 01C50E01-01EN
7. Setting Parameters
This transmitter can remotely handle sensor
type changes, range changes, Tag No. setup,
monitoring of self-diagnostic results, according to
communication with the field wireless configuration
tool or the device configuration tool.
7.1 Environment for parameter
setting
After installing the battery pack, perform
provisioning and have the instrument join the field
wireless network.
This transmitter supports the OOB (out-of-band)
method using infrared communication. For
details on how to provisioning, refer to section 6.4
“Connection to Field Wireless network”
F0701.ai
infrared port
Figure 7.1
Connecting the configuration Tool
7.2 Preparing Software
7.2.1 Softwares for the Field Wireless
Configuration Tool and the Device
Configuration Tool
Before using the device configuration tool, confirm
that CF/DD and DeviceDTM for your transmitter
(wireless YTA) are installed in the device
configuration tool.
Refer to the following website for the latest
information on CF/DD and DeviceDTM.
http://www.yokogawa.com
CF (Capabilities File) / DD (Device Description)
A CF file contains information, such as the
vendor of the field device, its model and
revision, available types of process data (flow
rate, temperature, pressure, etc.), and number
of data items. A DD file contains the information
on parameters, such as data structures and
attributes.
DeviceDTM
DeviceDTM, (Device Type Manager) is driver
software for field devices provided based on the
FDT (Field Device Tool) technology.
The field wireless configuration tool or the device
configuration tool allows confirming the device
information.
Refer to Subsection 8.2 “Calibration Instruments
Selection” for the field wireless configuration
tool or the device configuration tool of our
recommendation.
7.2.2 Software Download
Software download function permits to update
wireless field device software via ISA100.11a
wireless communication. For details, refer to
YFGW410 Field Wireless Management Station (IM
01W02D01-01EN).
