<2. Notes on Handling>
2-9
IM 01C50E01-01EN
2.10 Regulatory Compliance
for Radio and
Telecommunication
Please confirm that a installation region fulfills
a standards, require additional regulatory
information and approvals, contact to
Yokogawa Electric Corporation.
2.11 Radio and
Telecommunications
Terminal Equipment
Directive (R&TTE)
We, Yokogawa Electric Corporation hereby declare
that this equipment,model YTA510 series is in
compliance with the essential requirements and
other relevant provisions of Directive 1999/5/EC.
The CE declaration of conformity for R&TTE for this
product can be found at
http://www.yokogawa.com/fld/
2.12 FCC compliance
This equipment contains transmitter module FCC
ID: SGJ-WFC001.
This device complies with Part 15 of FCCRules.
Operation is subject to the following two conditions:
(1) this device may not cause interference, and (2)
this devicemust accept any interference, including
interference that may cause undesired operation of
this device.
Co-located:
This transmitter must not be co-located or
operated in conjunction with any other antenna
or transmitter.
FCC WARNING:
Changes or modifications not expressly
approved by the party responsible for
compliance could void the user’s authority to
operate the equipment.
NOTE
This equipment has been tested and found
to comply with the limits for a Class A digital
device, pursuant to part 15 of he FCC Rules.
These limits are designed to provide reasonable
protection against harmful interference when
the equipment is operated in a commercial
environment.
This equipment generates, uses, and can radiate
radio frequency energy and, if not installed
and used in accordance with the instruction
manual,may cause harmful interference to radio
communications. Operation of this equipment
in a residential area is likely to cause harmful
interference in which case the user will be
required to correct the interference at his own
expense.
2.13 Industry Canada (IC)
compliance
This equipment contains transmitter module IC:
8999A-WIC001.
This Class A digital apparatus complies with
Canadian ICES-003.
This device complies with Industry Canada license-
exempt RSS standard(s). Operation is subject to
the following two conditions: (1) this device may not
cause interference, and (2) this device must accept
any interference, including interference that may
cause undesired ,operation of the device.
Under Industry Canada regulations, this radio
transmitter may only operate using an antenna of a
type and maximum (or lesser) gain approved for the
transmitter by Industry Canada. To reduce potential
radio interference to other users, the antenna type
and its gain should be so chosen that the equivalent
isotropically radiated power (e.i.r.p.) is not more
than that necessary for successful communication.
This radio transmitter IC Number 8999A-WIC001
