YOKOGAWA WT500, Руководство пользователя

Страница: 55 / 360

2-32
IM 760201-01E
Waveform Label Display (See section 7.8 for operating instructions)
You can turn the display of waveform labels on or off.
Time at the right end
of the screen
Time at the left end of the screen
Minimum values
Maximum values
Waveform labels
Cursor Measurement (See sections 7.9 and 8.10 for operating instructions)
The value at the crossing point of the waveform and cursor can be measured and
displayed. The voltage or current at specific sections of the waveform and the data on
the horizontal axis (X-axis) can be measured. Cursor measurements are performed on
the data that is displayed on the screen.
Two cursors, marked by a plus sign and an x, appear on the screen. For each cursor, the
vertical value can be measured, and the X-axis value relative to the left end of the screen
can be measured. The differences between the cursor’s vertical values and X-axis values
can also be measured.
Measured values
+ cursor
x cursor
2.7 Waveform Display