manualshive.com logo in svg

YOKOGAWA WE7281, Руководство пользователя, Страница: 3 / 52

Поделиться
Скачать
YOKOGAWA WE7281 Скачать руководство пользователя страница 3

2

IM 707281-01E

Checking the Contents of the Package

Unpack the box and check the contents before operating the instrument.  If the contents

are not correct or missing or if there is physical damage, contact the dealer from which

you purchased them.

Measurement Module

Check that the model name given on the name plate matches those on the order.

MODEL

Model

Description

707281

WE7281 4-CH, 100 kS/s D/A Module

707282

WE7282 4-CH, 100 kS/s D/A Module (BNC output terminals)

NO.

When contacting the dealer from which you purchased the instrument, please quote the

instrument No.  The following is an example of WE7281.  The name plate is also at the

same position for WE7282.

MODEL

MODEL

NO.

NO.

Made in Japan

Standard Accessories

The following standard accessories are supplied with the instrument.  Make sure that all

items are present and undamaged.

User's Manual (1)
IM707281-01E

Terminal block (Model: A1460JT) (1)
(Included only with WE7281, attached to the module)

Optional Accessories (Sold Separately)

Name

Model

Description

Terminal block

A1460JT

Clamp type terminal, sold in units of 1 piece

* There are no optional accessories for WE7282.

Содержание WE7281





















































Отзывы:

Нет отзывов