manualshive.com logo in svg

YOKOGAWA WE7281, Руководство пользователя, Страница: 15 / 52

Поделиться
Скачать
YOKOGAWA WE7281 Скачать руководство пользователя страница 15

1-9

IM 707281-01E

1

Explanation of Functions

1.6  Waveform Generation in the FG Mode

Selecting the Output Mode (Continuous Oscillation/Trigger Oscillation/Gate
Oscillation)

The following three output modes are available.

Continuous oscillation

Continuously generates the waveform.

Output

ON

OFF

Output voltage

Trigger oscillation

Continuously generates the waveform when a trigger occurs.

Output

ON

OFF

Output voltage

Trigger signal

Gate oscillation

Generates the waveform while the gate signal is enabled.  The waveform is generated in

units of one cycle.  Therefore, the waveform that is being generated at the end of the

enable period is output until the end of the cycle.

Output

ON
OFF

Output voltage

Gate signal

Enable period

Output in units of one cycle

Note

• When the output mode is set to [Trigger], the trigger can be activated by inputting the bus

trigger signal* or by clicking the [Manual Trigger] button on the operation panel.

• When the output mode is set to [Gate], the gate can be opened or closed by inputting the bus

trigger signal* as a gate signal or by pressing down on the [Manual Trigger] button on the

operation panel for the desired amount of time during which the signal is to be enabled.

*A trigger signal that is provided via the WE bus of the measuring station.  For details, see the

 WE7000 User’s Manual (IM 707001-01E).

• A trigger that occurs while a waveform is being generated is ignored.

• If the output voltage range of a channel or the frequency, amplitude, or duty during a sweep

operation is changed while the waveform is being generated, waveform generation on all

channels is temporarily suspended.

• When the sweep operation is turned ON, the output mode is set to [Cont].

Содержание WE7281





















































Отзывы:

Нет отзывов