manualshive.com logo in svg

YOKOGAWA WE7281, Руководство пользователя, Страница: 27 / 52

Поделиться
Скачать
YOKOGAWA WE7281 Скачать руководство пользователя страница 27

3-2

IM 707281-01E

3.2

Setting the Output Conditions in the DC Mode

In this section, you will be using the operation panel that appears by double-clicking the

module icon in the station list window as shown in the figure below and the trigger

operation panel that appears by clicking the Trig tab.

Select the output mode

Select the output channel

Set the output voltage range

Set the output voltage

Execute manual trigger

Turn ON/OFF 
waveform output

Trig tab

Selecting the Output Channel

Check the [On] box of the channel you wish to output.

Setting the Output Voltage Range

Select the output voltage range from [1 V], [2 V], [5 V], and [10 V] in the [Range] list box.

Setting the Output Voltage

Set the output voltage in the [Output] entry box.  The output voltage can be set in units of

0.0001 V in the 1 V range and 0.001 V for all other ranges.

Setting the Output Mode

Select the output mode using the [Output Mode] option button.  The choices are shown

below.  [Cont] is default.

Cont: Continuous output

Continuously outputs DC voltage from the time the [Output] button is clicked to turn the

output ON until the next time it is clicked to turn the output OFF.

Trigger: Trigger output

After the [Output] button is clicked to turn ON the output, DC voltage is continuously

output when a trigger occurs.  If the output voltage is changed while the waveform is

being output, the new DC voltage is output the next time the trigger occurs.

Gate: Gate output

After the [Output] button is clicked to turn ON the output, the output starts when the gate

is enabled and stops when it is disabled.  The output voltage can be changed while the

gate is enabled.

Note

When the output is OFF, the waveform output terminal of the module outputs 0 V.

Содержание WE7281





















































Отзывы:

Нет отзывов