YOKOGAWA Stardom FCJ, Техническая информация

Страница: 34 / 37

< Appendix 2 Sample Libraries >
30
TI 34P02K71-01E 3rd Edition: Aug. 28, 2017-00
Appendix 2 Sample Libraries
This appendix describes procedure that uses a POU of the following
application portfolio on autonomous controller FCN-500.
FCN-500 is not bundled with License of these APPF. To use these, you must
replace the APPF library to the sample library. There is no need to replace the
POU.
- SAMA PF
- General PF
- Power Monitor Communication PF
- Temperature Controller
- Communication PF
- Boiler Control PF
- Boiler Auxiliary Control PF
● Step 1: Obtaining Sample Libraries
Download the sample libraries from the Web site to the library folder.
URL: https://partner.yokogawa.com/global/member/rtu/engsample/index.htm
E.g.(libraly folder):
“C:\YOKOGAWA\FCN-FCJ\LogicDesigner\Libraries”
● Step 2: Adding Sample Libraries
(1) Open the library compressed project file in the Logic Designer and compile it.
(2) Register the sample libraries to library of product tree in the Logic designer.
If the above application portfolio library is registered, please remove it.
Application PF
Application PF
Library name
Sample Library Name
SAMA PF SD_SAMA_PF SA_SAMA_PF
General PF SD_GENERAL_PF SA_GENERAL_PF
Power Monitor
Communication PF
SD_CPMPOU_PF SA_CPMPOU_PF
Temperature Controller
Communication PF
SD_DICPOM_PF SA_DICPOM_PF
Boiler Control PF SD_ABOILER_PF SA_ABOILER_PF
Boiler Auxiliary Control PF SD_ABOILERU_PF SA_ABOILERU_PF
● Step 3: Compiling and Downloading
(1) Re-compile the project in the Logic designer.
(2) Perform offline download the control application.