YOKOGAWA Stardom FCJ, Техническая информация

Страница: 36 / 37

< Appendix 4 Duolet Application >
32
TI 34P02K71-01E 3rd Edition: Aug. 28, 2017-00
Appendix 4 Duolet Application
This chapter describes the procedure for migrating the Java application of the
autonomous controller FCN-100/FCJ to the Duolet application of FCN-500.

Edit system configuration file DUONUS.PRP
After converting by FcxConvert, # is added before JavaStart and AdditionalClassPath in
the system setting file DUONUS.PRP. After restoring to NFCP501/NFCP502, remove
the # before the JavaStart and AdditionalClassPath in the system configuration file
DUONUS.PRP so that the application to be used is activated.
For details on editing the system configuration file, refer to "B 2.4.2 Editing System
Setting Files " in FCN/FCJ Guide, IM 34P02Q01-01E.

Migration of Duolet (Java) Application Project
To use the project created before R4.02 with FCN-500, project migration work is
required. Migrate the project according to the following procedure.
(1) Change the CallJavac.bat file in the project folder of the Duolet application to a
different name such as CallJavac.bat.old.
(2) Change the Ftp2Fcx.bat file in the project folder of the Duolet application to a
different name such as Ftp2Fcx.bat.old.
(3) Copy CallJavac.bat, CallJavac_Fcn500.bat, Ftp2Fcx.bat from the
"Project
\
Template" folder under the installation folder to the project folder of the
Duolet application.
(4) Set the controller's IP address, the package to be included in the JAR, and the
JAR file name in Ftp 2 Fcx.bat.
(5) Execute CallJavac.bat or CallJavac_Fcn500.bat and confirm that the Duolet
application is created.
SEE ALSO
- Deprecated methods of IEC control data access class can not be used with FCN - 500. For details,
refer to the online help of FCN/FCJ Duolet application development kit.
- For transfer of Duolet application, refer to the online help of FCN/FCJ Duolet application
development kit.