YOKOGAWA Stardom FCJ, Техническая информация

Страница: 29 / 37

< 3. Migration in-house equipment in advance>
25
TI 34P02K71-01E 4th Edition: Jun. 6, 2018-00
TIP
The IP address of the restored NFCP501/NFCP502 is reflected the IP address of NFCP100.
If necessary, change the IP address. If field bus (NFLF111, NFLP121, NFLC121) are used, do the
following after Step B7 restore. Step B13-1: Exported by Resource Configurator, Step B13-2: Change
IP address, and Step B13-3: Imported by resource configurator.
License information can’t be migrated to the FCN-500. Please use the CPU module to the required
licenses are bundled.
● Step B14: Setting each function for the NFCP500
(1) Set some settings for new function or additional configuration by the resource
configurator, and download it.
- Duolet function ( If necessary )
- CPU duplex configuration (
If necessary
)
- Ethernet port No.3 and No.4 for NFCP502 ( If necessary )
- SD card (
If necessary
)
- I/O definition (migrating from NFJT100 only)
(2) Set some settings for new function or additional configuration by the resource
configurator,.
- SNTP server (
If necessary
)
SEE ALSO
For setting of the SNTP server, refer to the "2.2.6 Time Synchronization" TI "STARDOM Engineering
Guide (FCN-500/FCN-RTU)".