YOKOGAWA MG8G, Руководство пользователя, Страница: 51 / 63

<10. OTHER FUNCTIONS>
10-2
IM 11P03A03-01E 6th Edition : Jan. 26, 2022-00
Table 10.1 Factory Default Settings
Func
No.
Function Factory Default
00 Entering password
01 Executing calibrations
02 Setting calibration gas concentrations ZERO key: 0.000, SPAN key: 20.95
03 Checking calibration coefficients
04 Setting output hold function during calibration 0: enabled
05 Initializing calibration coefficient
10 Setting remote range switching contact input 1: disabled
11 Selecting range 3: range 3
12 Setting span for range 1 005 (0 to 5% range)
13 Setting span for range 2 010 (0 to 10% range)
14 Setting span for range 3 025 (0 to 25% range)
16 Fixed analog output
20 Setting low limit alarm 00.00
21 Setting high limit alarm 25.00
22 Setting high/low limit alarm function 0: disabled
30
Checking temperature (°C) of constant temperature
chamber
31 Checking sensor emf (mV)
40 Executing error check
41 Resetting sensor emf error status
42 Resetting calibration coefficient error status
43 Setting output hold function when error occurs 1: enabled – at last measured value
44 Setting preset value 00.00
45 Setting contact output status when error occurs 0: contact closes when error occurs
50 Setting initial wait time for automatic calibration 00.00 (0 day 0 hour)
51 Setting interval for automatic calibration 30.00 (30 days 0 hour)
52 Setting zero calibration time 10 (10 minutes)
53 Setting span calibration time 10 (10 minutes)
54 Setting purge time 10 (10 minutes)
55 Executing span calibration 1: executes span calibration
56 Setting the number of times of skipping span calibrations 00 (no skipping)
57 Starting automatic calibration function 0: OFF
58 Manual operations of solenoid valves
67 Checking error status
98 Checking firmware version
99 Initialization