manualshive.com logo in svg

YOKOGAWA MG8G, Руководство пользователя, Страница: 2 / 63

Поделиться
Скачать
YOKOGAWA MG8G Скачать руководство пользователя страница 2

i

IM 11P03A03-01E

6th Edition : Jan. 26, 2022-00

u

 Introduction

Thank you for purchasing the MG8G Paramagnetic Oxygen Analyzer.
Please read the following respective documents before installing and using the MG8G 

Paramagnetic Oxygen Analyzer.

The related documents are as follows.

* the “E” in the document number is the language code.

General Specifications

Model MG8G (General Purpose) Paramagnetic Oxygen Analyzer 

GS 11P03A03-01E

User’s Manual

Model MG8G Paramagnetic Oxygen Analyzer   

IM 11P03A03-01E (this manual)

l

  Precaution in Unpacking

This analyzer is a precision instrument. Beware of the effect of shock on the analyzer, especially 

while unpacking, and avoid dropping it or letting it hit another object.

 CAUTION

The product is very heavy (approx. 18 kg). Handle it with care. Be sure not to accidentally drop it. 

Handle it safely to avoid injury.

l

  Check of Model Name and Specifications

The nameplate on the inside of the converter door shows the main items. Check to see if the 

specifications are as specified.

 WARNING

Depending on the measurement gas, even the very small mount have the potential of the cause 

of the accident and the influence on the human body(such as:Burning, explosion, the toxicity, 

odor-related acridity, polymerization-related degradability, corrosion).
By appropriate setting and plumbing, be careful not to have the inhalation to the human body and 

the stay of dangerous gas, poisonous gases enough.

 WARNING

Use cable with a durable temperature of at least 70°C.

 WARNING

Please do not disassemble and remodel.

It cause Electric shock, failure, ignition, and gas leak.

Media No. IM 11P03A03-01E 

6th Edition : Jan. 2022 (YK)

All Rights Reserved Copyright © 1989, Yokogawa Electric Corporation

Содержание MG8G
































































Отзывы:

Нет отзывов