YOKOGAWA MG8G, Руководство пользователя, Страница: 30 / 63

<6. OPERATIONS>
6-1
IM 11P03A03-01E 6th Edition : Jan. 26, 2022-00
6. OPERATIONS
6.1 Operation Keys
The operation keys on the panel are shown in Figure 6.1 and their functions are summarized in
Table 6.1.
FAIL
OUTPUT
FUNC
Vol%O
2
MEAS
MAINT
AS
H-ALM
L-ALM
HEATER
AUTO CAL
LCL.RANGE
RMT.RANGE
ENABL
INHIBIT
DATA
PARAMAGNETIC OXYGEN ANALYZER
SPAN
ABL
ZERO ▲ FUNC ▲
DECIMAL
POINT SHIFT
▲
INCR EXEC
MEAS/MAINT
F9.1E.ai
Figure 6.1 Operation Panel
Table 6.1 Operation Keys and Their Functions
Key Function
MEAS/MAINT
Hold this key and press EXEC key to switch measurement (MEAS) mode and
maintenance (MAINT) mode.
SPAN
Used to execute span calibration in calibration.Used to enter span gas concentration
in setting.
ZERO
Used to execute zero calibration in calibration.Used to enter zero gas concentration
in setting.
FUNC
Used to change the Function Number. Each press increases the number by one
increment. Change the tens and ones digits independently.
DECIMAL POINT
Used to move the decimal point in setting. In this manual this key is referred to as the
DP key.
SHIFT
Used to blink digit on DATA display or to move blinking digit in setting.
INCR
Each press increases the active value by one increment in setting.
EXEC Used to confirm data entry or to execute function.