《目次》 《索引》
TI 71M01D03-03
1st Edition : 2007.03.12-00
6-1.3 How to Operate homing move
Operation Flow
1
1
Click [Drive].
2
3
2
3
Click
[Table operation].
Click [Drive].
4
4
6-1.4 If homing error occurs...
Error LED turns red or
yellow.
Homing error occurs when the measured positioned value
is outside the targeted value. Adjust sensor-dog
position, and execute homing operation again until the
measurement result is inside the target.
5
6
5
Click [Servo off].
Click [Error reset].
6
Shift sensor-dog around
0.5 deg. On motor.
7
7
Click [Servo on].
8
Drive window is displayed.
Start homing move.
Homing is complete when motor
stops.
Be careful! Motor moves.
Once error occurs, no
operation, other than [Servo
off] or [Error reset], is
possible.
Select [No. 000] from
[Table No.]
Homing operation is selected.
Servo is turned off.
Error status is cleared, and
error LED turns off.
8
9
9
Click [Drive].
10
10
Servo turns on.
Try homing again.
6-3
