30
IM 701450-61E
Menu on the DL7480
Display example of the Item Setup dialog box
Mark at the left of the highlighted
measurement parameter
CH1, CH3, and CH5 when power
analysis is specified on the
searched waveform
CH2, CH4, and CH6 when power
analysis is specified on the
searched waveform
CH7, CH8, Math1, Math2 and CH1
to CH6 when power analysis is not
specified on the searched
waveform
• CH5 to CH8 can be used only on the DL7480.
• For CH5 to CH8, measurement parameters Int1XY and Int2XY are not available.
The rest of the procedure is the same as steps 13 to 22 in section 10.3 (pages 10-12 and
10-13) in the
DL7440/DL7480 User’s Manual
.
9 Performing History Search Using Measured Values of Power Analysis Parameters
