14
IM 701450-61E
Menu on the DL7480
Display example of the Item Setup dialog box
Mark at the left of the highlighted
measurement parameter
CH1, CH3, and CH5 when power
analysis is specified on the
measured waveform
CH2, CH4, and CH6 when power
analysis is specified on the
measured waveform
CH7, CH8, Math1, Math2 and CH1
to CH6 when power analysis is not
specified on the measured
waveform
• CH5 to CH8 can be used only on the DL7480.
• For CH5 to CH8, measurement parameters Int1XY and Int2XY are not available.
The rest of the procedure is the same as steps 9 to 32 in section 10.6 (pages 10-47 to
10-49) in the
DL7440/DL7480 User’s Manual IM701450-01E
.
Performing Automated Measurement of Power Analysis Parameters on Dual
Areas
The procedure is the same as steps 1 to 15 in section 10.8 (pages 10-61 to 10-63) in the
DL7440/DL7480 User’s Manual IM701450-01E
. If the power analysis function is turned
ON, power analysis parameters are available when selecting the measurement
parameters in the Item box under Area1 or Area2 in the Item dialog box. The selectable
types are the same as those of normal automated measurement described above
(automated measurement on single area).
5 Performing Automated Measurement of Power Analysis Parameters
