14
IM CW500-02EN
Note
• Before using a new SD memory card, be sure to format it on the
CW500. Proper recording may not be possible if you format it on a
PC. For details, see “Formatting” in the manual in the CD.
• Frequently used SD memory cards or those used over a long period
may lose their ability to record data due to the service life of the flash
memory. Replace such cards with new ones.
• Data recorded on SD memory cards may be lost or corrupted due to
accidents or failures. Regularly back up recorded data. Yokogawa will
not be liable for damages incurred by lost or corrupt data, regardless
of the cause or content.
Inserting an SD Memory Card
1.
Open the connector cover.
2.
Face the front side of the SD memory card up, and insert it in the
direction of the arrow in the figure until it clicks.
3.
Close the connector cover. Be sure to close the connector cover
unless there is a special reason not to.
Removing the SD Memory Card
1.
Open the connector cover.
2.
Gently push the SD memory card further into the slot. The latch will
disengage, and the SD memory card will pop out.
3.
Remove the card from the slot.
4.
Close the connector cover. Be sure to close the connector cover
unless there is a special reason not to.
SD memory card
Connector cover
Inserting and Removing the SD Memory Card