x
IM CW500-02EN
● Use the Correct Power Cord and Plug
• Only use the dedicated AC adapter and power cord for this
instrument.
• Do not use this instrument’s power cord with other
instruments.
● Use the Correct Power Supply
• Make sure that the power supply voltage matches the
instrument’s rated supply voltage and that it does not exceed
the maximum voltage range specified for the power cord.
• If an appropriate AC outlet for the supplied power cord is
unavailable, do not use the instrument.
• Connect after checking that the power switch of the instrument
is turned off.
● Batteries
Do not mix new and old batteries or mix different brands or
types of batteries. The batteries may leak, heat up, or burst
due to their characteristic differences.
Never replace the batteries while measurement is in progress.
● Do Not Operate in an Explosive Atmosphere
Do not operate the instrument in the presence of flammable
gases or vapors. Doing so is extremely dangerous.
● Do Not Remove Covers or Disassemble or Alter the
Instrument
Only qualified YOKOGAWA personnel may remove the covers
and disassemble or alter the instrument.
● Use the Instrument in Appropriate Locations
• Do not use the instrument in locations subject to rain or water.
• Use the instrument in a location where you can immediately
remove the power cord if an abnormal or dangerous condition
occurs.
• Never use the instrument with circuits that exceeds 300 VAC
for CAT.IV, 600 VAC for CAT.III, and 1000 VAC for CAT.II.
● Never use the instrument if the instrument or your hand is
wet or when condensation or other water droplets are on the
instrument.